My Project is a place to keep all of your favourite colours and accent profiles.

Add your favourites from around the site by clicking the + symbol on any pages.

You can then email yourself or a friend a shopping list which you can take into your local Mitre 10 store.

SOLUTION FINDER

INTERIOR WALLS

Premium Low Sheen Acrylic

  • Highly washable and stain resistant
  • Mould resistant
  • Low odour and low VOCs
  • Water based

Premium Semi Gloss Acrylic

  • Highly washable and stain resistant
  • Moisture and mould resistant
  • Low odour and low VOCs
  • Water based

Premium Gloss Acrylic

  • Highly washable and stain resistant
  • Moisture and mould resistant
  • Low odour and low VOCs
  • Water based

Remove all loose, powdery and flaking paint. Wash down with accent sugar soap and rinse with clean water to remove any dirt, oil or grease. Treat any mould present on the surface with a bleach solution diluted 3 to 1 with water, then wash again with fresh water. Sand glossy surfaces. Fill any cracks or holes with a suitable accent filler, sand and dust off. Bare plasterboard or timber should be prepared by applying a suitable accent undercoat or primer.


WINDOWS, DOORS & TRIM

Semi Gloss Enamel Water Based

  • Interior & Exterior
  • Fast Drying
  • Tough and hard wearing finish
  • Stain and moisture resistant
  • Non yellowing formula
  • Low odour

Gloss Enamel Water Based

  • Interior & Exterior
  • Fast Drying
  • Tough and hard wearing
  • Stain and moisture resistant
  • Non yellowing formula
  • Low odour

Semi Gloss Enamel

  • Interior
  • Oil Based
  • Washable and stain resistant
  • Tough and hard wearing
  • Moisture resistant

Gloss Enamel

  • Interior & Exterior
  • Oil Based
  • Washable and stain resistant
  • Tough and hard wearing
  • Moisture resistant

Remove all loose, powdery and flaking paint. Wash down with accent sugar soap and rinse with clean water to remove any dirt, oil or grease. Sand any glossy surfaces. Fill holes and other imperfections with a suitable accent filler, sand smooth and dust off. Bare timber or metal should be prepared by applying a suitable accent primer.

CEILINGS

Premium Ceiling White

  • Excellent hiding power
  • Low splatter
  • Low odour and low VOCs
  • Flat Finish

Premium One Coat Ceiling White

  • Ultra flat finish
  • Hides surface imperfections
  • Low splatter
  • Low odour and low VOCs
  • One coat over previosuly painted surfaces

Remove all loose, powdery and flaking paint, wash down with Accent sugar soup and rinse with clean water to remove any dirt, oil or grease. Treat any mould present on the surface with a bleach solution diluted 3 to 1 with water, then wash again with fresh water. Sand glossy surfaces. Fill any cracks or holes with a suitable Accent filler, sand and dust off. Bare plasterboard and any repaired areas should be prepared by applying a suitable Accent undercoat or primer.

KITCHENS, BATHROOMS & LAUNDRIES

Kitchen & Bathroom Low Sheen

  • Mould and moistureresistant technology
  • Protection in wet and humid conditions
  • 5 year guarantee

Previously Painted Surfaces: Scrape off loose or flaking paint. Sand gloss and semi gloss surfaces thoroughly before top coating. If mould or mildew is not present, the surface should be scrubbed down with a thick scouring pad and sugar soup. Wear gloves and goggles. Rinse with clean water and wipe. The scouring pad will lightly abrade the surface and any deposits of grease or oil on the surface will be removed. Any heavy oily deposits should receive special attention with Accent sugar soap. In cases where mould or mildew is present, use hypochlorite solution instead of sugar soap.

Household bleaches contain hypochlorite. Dilute 1 part hypochlorite with 3 parts clean water. Wear gloves and goggles. As above, use a scouring pad wet with the hypochlorite solution to lightly abrade the surface and ensure physical removal of stubborn areas of mould growth. Leave the solution on the surface for 15 minutes then thoroughly remove by washing down. Bare Paperfaced Wallboard, Cement, Brick: Brush down to remove dust. Apply 1 coat of Accent Acrylic Sealer Undercoat or Accent Multi Prep Acrylic. Bare Set Plaster, Fibrous Plaster: Brush down to remove dust. Fill cracks with a suitable filler, sand and dust down. For best results apply 1 coat of Accent Triple Prep Oil Based.

EXTERIOR WALLS

Solarmax Exterior Low Sheen Acrylic

  • 15 year guarantee
  • Self Priming
  • Maximum UV protection
  • Mould and dirt resistant
  • Low Sheen Finish

Solarmax Exterior Gloss Acrylic

  • 15 year guarantee
  • Self Priming
  • Maximum UV protection
  • Mould and dirt resistant
  • Gloss Finish

Previously Painted Surfaces: Scrape off loose and flaking paint. Sand glossy surfaces. Wash with accent sugar soap and rinseclean. Fill any cracks or holes with a suitable accent filler, sand and dust off. A light sanding of the paint surface is recommended prior to the application of the topcoat.

Bare Timber: Remove any grey or weathered timber with sanding.Fill holes and other imperfections with a suitable filler, sand smooth and dust off. Apply one coat of accent Multi Prep Acrylic or accent Timber Primer.

Bare Galvanised Iron/Zincalume: Scrub with sugar soap and rinse with water.

Steel and Wrought Iron: Remove all rust by scraping, sanding and wire brushing. Remove oil and grease by washing with mineral turpentine before applying one coat of accent Multi Prep Oil Based.

Brick, Masonry and Fibro Cement: Fill holes with grouting cement. Wash down with water using a stiff brush to remove all loose material. Wash with a bleach solution diluted 3 to 1 with water and/or demossing chemical to remove mould or moss, then hose down. Apply one coat of accent Multi Prep Acrylic.

Doors and Window Frames

Semi Gloss Enamel Water Based

  • Interior & Exterior
  • Fast Drying
  • Tough and hard wearing finish
  • Stain and moisture resistant
  • Non yellowing formula
  • Low odour

Gloss Enamel Water Based

  • Interior & Exterior
  • Fast Drying
  • Tough and hard wearing
  • Stain and moisture resistant
  • Non yellowing formula
  • Low odour

Gloss Enamel

  • Interior & Exterior
  • Oil Based
  • Washable and stain resistant
  • Tough and hard wearing
  • Moisture resistant

Remove all loose, powdery and flaking paint. Wash down with accent sugar soap and rinse with clean water to remove any dirt, oil or grease. Sand any glossy surfaces. Fill holes and other imperfections with a suitable accent filler, sand smooth and dust off. Bare timber or metal should be prepared by applying a suitable accent primer.

FENCES

Fence Finish

  • Decorative finish
  • Water based paint
  • Ideal for use on exterior timber, cement sheeting and metal fences.
  • No undercoat required
  • Water wash up.

Surface must be clean, dry and free from grease, dirt, dust, loose or flaking paint and mould. Remove any loose wood fibres and grey or weathered timber using a stiff bristled brush. Dirt can be brushed or hosed off. For timber surfaces, no primer is necessary when using dark colours. For best results on new timber and to avoid tannin staining, prime with a suitable primer.

DECKING

Waterbased Decking Oil

  • Provides an enriched finish
  • Enhances and protects decking and exterior timber
  • Will not crack or blister
  • Dirt and Mould resistant
  • Waterbased

Oil based Decking Oil

  • Provides an enriched finish
  • Enhances and protects decking and exterior timber
  • Will not crack or blister
  • Dirt and Mould resistant
  • Oil Based

Prior to coating, all surfaces must be thoroughly free from all first, dust, grease, wax and oil. Ensure the surface is clean, smooth and completely dry before applying the product.

New or bare timber: Wash timber thoroughly with Accent deck cleaner following instructions to prepare the surface, removing dirt, mildew, mould, oil, wax and soluble tannins. Wash again with fresh water.

Previously painted or stained timber: All paint and stains must be thoroughly removed by stripping or sanding back the bare timber. Ensure all sanding dust is removed and clean with Accent deck cleaner following label instructions. If the timber is contaminated with mould, fungi or algae wash well with a household bleach diluted 3:1 with water, then wash with Accent Deck Cleaner and wash again with fresh water.